0 connecting electronic equipment, 1 indicator to peripherals, Connecting electronic equipment – Rice Lake SURVIVOR ATV User Manual
Page 11
Connecting Electronic Equipment
7
3.0
Connecting Electronic Equipment
Sixty feet of six-wire home run cable is supplied for wiring the J-box to the indicator. It is best to run this in 3/4"
galvanized metal or plastic conduit from the J-box to the indicator. Conduit for this purpose and for connecting
peripherals is to be obtained locally. A section of flexible conduit with connector is provided where this cable exits
the load cell pocket. Do not run any other electrical cables in or near the conduit to the indicator.
3.1
Indicator to Peripherals
Figure 3-1. Conduit Run in Trench
Conduit runs may be buried in a trench or secured above ground. Use separate conduit runs for AC power and DC
data lines to avoid interference. As a general guideline, run AC and DC cables in separate trenches if possible.
When DC data cables must run in the same trench as AC power lines, separate cables as much as possible.