Rice Lake Zebra GK420t - Manual (Page 18)

Introduction
What’s in the Box? 6
980610-001 Rev. A GK420t User Guide 12/14/07
Operator Controls
Power Switch
Press up to turn ON or down to turn OFF the printer.
Feed Button
• Tap the Feed button once to force the printer to feed one blank label.
• Press the Feed button to take the printer out of a “pause” condition. The printer is put into
“pause” by either a programming command or an error condition. See What the Status
Light is Telling You on page 68 in the Troubleshooting chapter.
• Use the Feed button for printer setup and status (see Feed Button Modes on page 77 in the
Troubleshooting chapter).
Caution •
The printer pow er should be turned off before connecting or disconnecting the
communications and power cables.
Power OFF Power ON
Power Switch
Power Switch