Rice Lake Zebra GK420t - Manual (Page 67)

55 Maintenance
Cleaning
12/14/07 GK420t User Guide 980610-001 Rev. A
Cleaning the Printhead
Alway s use a new cleaning pen on the printhead (an old pen carries contaminants from its
previous uses that may damage the printhead).
When y ou load new media, y ou can also clean the printhead.
1. Rub the cleaning pen across the dark area of the printhead. Clean from the middle to the
outside. This will move adhesive transferred from the edges of media to the printhead
outside of media path.
2. Wait one minute before closing the printer.
Caution • The printhead becomes hot while printing. To protect from damaging the
printhead and risk of personal injury, avoid touching the printhead. Use only the cleaning
pen to perform maintenance.