Rice Lake Zebra GK420t - Manual (Page 58)

Printer Options
Label Dispenser Option 46
980610-001 Rev. A GK420t User Guide 12/14/07
3. Insert the label liner between the dispenser door and the printer body.
4. Close the dispenser door.
5. Press the Feed button to advance the media.
6. During the print job, the printer will peel off the backing and present a single label. Taking
the label from the printer to allow the printer to print the next label. Note: If you did not
activate the label taken sensor to detect the removal of the dispensed (peeled) label with
software commands, the printer will stack and eject peeled labels.