Ring Communications DNA100 - Manual (Page 15)

April 2012 Digital Network Adapter DNA100
Description of Status :
OK - Supervised station in idle.
CALL - Incoming event in queue, designated as C
ALL
by annunciating device.
ALARM - Incoming event in queue, designated as A
LARM
by annunciating device.
TALK - In conversation with this DNA100's master station.
FAULT - Incoming event indicating a hardware problem at/to that location.
PARK - An event placed on hold.
BUSY - Another Display is handling this call.
PWRFAIL - Power failure in a device (CB901 lost power and is running on batteries).
ACKNOWL - Non voice event has been acknowledged (such as PWRFAIL).
Description of Status Headings :
QUE - Actual numbered position in the queue for incoming events.
DATE/TIME - The date and time the event was detected.
PRI - Priority level of incoming event (1 - 9; 1 - highest, 9 - lowest).
STATUS - Status of each line (CALL, FAULT, TALK, PARK, BUSY, ALARM).
EXT - The dial number of the calling station.
LOCATION DESCRIPTION - Text description of calling location. Created during N
ETWORK
C
ONFIGURATION
.
The bottom line of the S
TATUS
D
ISPLAY
is the status for the master station for this DNA100's display.
QUE - The total number of events in queue
DATE/TIME - The present date and time (updated every second)
STATUS - Status of the Master station. (IDLE, TALK, WAIT, DIAL)
EXT - Dial number of the Master station
LOCATION DESCRIPTION - Text description of this Master station. Created during N
ETWORK
C
ONFIGURATION
.
11
Ring-Master