Ring Communications DNA100 - Manual (Page 19)

April 2012 Digital Network Adapter DNA100
NIGHT TRANSFER MODE -
The DNA100 is placed in Night Transfer mode by placing the associated intercom station in privacy. Calls to this
DNA100 will now be sent to the next Annunciator device in the Annunciator address chain (for the sub station)
without the programmed delay. The delay is used in normal Day mode to delay calls before they transfer (Max
delay 9.9 minutes). When the DNA100 is in transfer mode the time display will flash the word “TRANSFER” .
Calls are still qued in the DNA100 but the beeper is silenced. The beeper will beep once every 60 seconds as a
reminder that the we are in transfer mode. The DNA100 may answer calls in the Que while in transfer mode.
15
Ring-Master