Ring Communications DNA200 - Manual (Page 12)

DNA200 OPERATIONS MANUAL 12 2008/05/01
SERIAL PORT
Set Parity, Data bits, Stop bits for the serial port to the Video Switcher.
PROGRAMMING
The following commands are used for this feature.
STTY
Set Serial Port Characteristics
LTTY List Serial Port Characteristics
Example: Set No Parity, 8 Data bits, 1 Stop bit
>STTY
cr
Mode 0 = Even, 7 Data, 2 Stop
Mode 1 = Odd, 7 Data, 2 Stop
Mode 2 = Even, 7 Data, 1 Stop
Mode 3 = Odd, 7 Data, 1 Stop
Mode 4 = None, 8 Data, 2 Stop
Mode 5 = None, 8 Data, 1 Stop
Mode 6 = Even, 8 Data, 1 Stop
Mode 7 = Odd, 8 Data, 1 Stop
Serial Port Mode <0..7> : 5
cr
>LTTY
cr
Mode 5 = None, 8 Data, 1 Stop
>
Switcher Protocol
Select Video Switcher Protocol.
PROGRAMMING
The following commands are used for this feature.
SSP
Set Switcher Protocol
LSP List Switcher Protocol
Example: Set Vicon Protocol
>SSP
cr
Protocol 0 = Vicon
Protocol 1 = American Dynamics Alarm
Protocol 2 = American Dynamics or Pelco
Protocol 3 = Panasonic
Protocol 4 = AutoPatch
Protocol 5 = Robot
Protocol 6 = VideoBlox
Switcher Protocol <0..4> : 0
cr
>LSP
cr
Protocol 0 = Vicon
>