Ring Communications DXC910 - Manual (Page 21)

21 DXC910 OPERATIONS MANUAL 2007/05/17
DIRECT ACCESS
There is one direct access number for each subscriber (DC shift).
PROGRAMMING
The following commands are used for this feature.
SDA
Set Direct Access
LDA List Direct Access
Example 1: Set direct access for subscriber 12 to dial subscriber 18.
>SDA
cr
Call Number <10-99/*> : 12
cr
Call Number to be dialed <10..99/U> : 18
cr
>LDD
cr
Call Number <10-99/*> : 12
cr
Call Number DA DD-0 DD-1 DD-2 DD-3 DD-4 DD-5 DD-6 DD-7 DD-8 DD-9
=========== ==== ==== ==== ==== ==== ==== ==== ==== ==== ==== ====
12 18
>
DIRECT DIAL
There are 10 direct dial numbers for each subscriber (key 0-9).
PROGRAMMING
The following commands are used for this feature.
SDD
Set Direct Dial
LDD List Direct Dial
Example 1: Set direct dial for subscriber 14 key #5 to dial subscriber 23.
>SDD
cr
Call Number <10-99/*> : 14
cr
Key Number <0..9> : 5
cr
Call Number to be dialed <10..99/U> : 23
cr
>LDD
cr
Call Number <10-99/*> : 14
cr