Ring Communications DXC910 - Manual (Page 28)

28 DXC910 OPERATIONS MANUAL 2007/05/17
ALL CALL
Allows for one way paging from one station to all other stations in the exchange and will override other
calls (they will reconnect when the All Call is completed). The initiating station must have privilege “All Call
Access”. The duration of the All Call is limited to 60 seconds (programmable subscriber timer). The call
number for All Call is 70. The All Call is ended with X for termination or 8 for call back (meet me). One of the
stations can then dial 90 to call back to the All Call initiator. The call back is active until one station dials 90 or
a new call back is activated from another All Call or Group Call. It is possible to exclude receivers from the All
Call. This is done by entering call numbers in the All Call exclusion group (group #0).
PROGRAMMING
The following commands are used for this feature (see Group Call).
SGCM
Set Group Call Members
LGCM List Group Call Members
SPT Set Privilege Type
GROUP CALL
Allows for one way paging from one station to a group of stations and will override normal calls (they will
reconnect when the Group Call is completed). The initiating station must have privilege “Group Call Access”.
The duration of the Group Call is limited to 60 seconds (programmable subscriber timer). There are 7 Group
Calls in the system with access call numbers 71-77. The Group Call is terminated with X or 8 for call back
(meet me). One of the stations can then dial 90 to be connected to the Group Call initiator. The call back is
active until one station dials 90 or a new call back is activated from another All Call or Group Call. Call number
of the receivers are entered in the Group Call groups (group 1-7). All station may be a members of multiple
Group Call groups. Only one Group Call can be active at a time. Stations calling Group Call when it is in use
may camp on until it is free.
PROGRAMMING
The following commands are used for this feature.
SGCM
Set Group Call Members
LGCM List Group Call Members
SPT Set Privilege Type
Example 1: Exclude stations 10 and 11 from All Call #0 (70).
>SGCM
cr
Call Number <10-99/*> : 10-11
cr