Ring Communications DXC910 - Manual (Page 9)

9 DXC910 OPERATIONS MANUAL 2007/05/17
PERSONAL QUE
Each intercom station has a Personal Queue. This queue is activated with privilege “Personal Queue”.
All received calls are then put in the personal que and the intercom station will ring (2 second on, 3 second
off) until the call is answered by pressing the 0-key. When the call is cancelled (X) the next call in queue
starts ringing after 2 seconds (programmable subscriber timer). With the privilege “Automatic Answer” the
call is automatically connected without pushing the 0-key.
Calls are inserted to the personal queue on a first in first out within each priority level (1-9). The priority
level is the Call Priority of the calling station (level 1 is highest priority). The calling station may be connected
to Ringing Tone, Program Channel or silence when in que. The personal queue may be displayed and
answered on a DAD104.
TRANSFER
Call Transfer is used to distribute incoming calls to additional intercom station. Call transfer is using the
personal que. Each subscriber may be programmed with 7 transfer numbers with delays. When a call is
place to a intercom station with “personal queue” the call will be inserted in the personal que of the called
station. When the transfer 1 delay expires the call will be placed in the personal que of the transfer 1
intercom station. The transfer 2 delay is then activated and when it expires the call is inserted in the personal
que of the transfer 2 intercom station. This sequence is then repeated for transfers 3-7 if programmed. The
incoming call is now in the personal queue of multiple intercom stations and when one of them answer the
call it is removed from all the personal queues. The transfer delay is 0 - 9 minutes or infinite. If a transfer
station is in privacy then the delay to that station is set to 0 and the call will transfer instantly (used for night
transfer). Personal Queue is always used when calls transfer to another intercom station independent of the
“personal queue” privilege.
ALL CALL
Allows for one way paging from one station to all other stations in the exchange and will override other
calls (they will reconnect when the All Call is completed). The initiating station must have privilege “All Call
Access”. The duration of the All Call is limited to 60 seconds (programmable subscriber timer). The call
number for All Call is 70. The All Call is terminated with X, or 8 for call back (meet me). One of the stations
can then dial 90 to call back to the All Call initiator. The call back is active until one station dials 90 or a new call
back is activated from another All Call or Group Call. It is possible to exclude receivers from the All Call. This
is done by entering call numbers in the All Call exclusion group (group #0).