Sage Nutri Juicer BJE410UK - Manual (Page 11)

10
PAge heAder..... aSSEmBlIng yoUr nEW aPPlIanCE
BEforE fIrSt USE
Before using your juicer for the first time,
remove and safely discard any packaging
materials and promotional stickers
and labels.
Ensure the appliance is switched off at the
power outlet and the power cord is unplugged.
Wash the filter bowl surround, filter basket,
juicer cover, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
1. Place motor base on a flat, dry
surface such as a bench top. Ensure
that the motor base is switched OFF
at the control panel, then switch the
appliance off at the power outlet and
unplug the power cord.
2. Place filter bowl surround on top of
the motor base.
3. Align the arrows at the base of the
stainless steel filter basket with the
arrows on the motor drive coupling
and push down until it clicks into
place. Ensure the stainless steel filter
basket is fitted securely inside the
filter bowl surround and onto the
motor base.
4. Place the juicer cover over the filter
bowl surround, positioning the feed
chute over the stainless steel filter
basket and lower into position.