Sage Nutri Juicer Plus BJE520UK - Manual (Page 11)

10
PAge heAder..... aSSEmBlIng yoUr nEW aPPlIanCE
BEforE fIrSt USE
Before using your juicer for the first time,
remove any packaging material and
promotional stickers and labels. Ensure the
appliance is switched off at the power outlet
and the power cord is unplugged.
Wash the filter bowl surround, Nutri Disc™,
juicer cover, Froojie™ Disc, Nutri Juicer™
Plus insert, food pusher, pulp container and
juice jug and lid in warm, soapy water with
a soft cloth. Rinse and dry thoroughly. The
motor base can be wiped with a damp cloth.
Dry thoroughly.
for USE WItH JUICE ExtraCtor
1. Place the motor base on a flat, dry
surface such as a bench top. Ensure
that the motor base is switched OFF
at the control panel, then switch the
appliance off at the power outlet and
unplug the cord.
2. Place the filter bowl surround on top
of the motor base.
3. Align the arrows at the base of the
Nutri Disc™ with the arrows on the
motor drive coupling and push down
until it clicks into place. Ensure the
Nutri Disc™ is fitted securely inside
the filter bowl surround and onto the
motor base.
4. Place the juicer cover over the filter
bowl surround, positioning the feed
chute over the juice disc and lower
into position.