Sage Nutri Juicer Plus BJE520UK User Manual

Page 5

Advertising
background image

4

PAge heAder.....

WE rECommEnd SafEty fIrSt

Carefully read all instructions

before operation and save for

future reference.

Remove any packaging

material and promotional

stickers and labels before

using the juicer for the

first time.

Do not place the juicer near

the edge of a bench or table

during operation.

Ensure that the surface is

level, clean and free of water,

flour, etc. Vibration during

operation may cause the

appliance to move.

Any significant spillage onto

the surface under or around

the appliance, or onto the

appliance itself, should be

cleaned and dried before

continuing to use

the appliance.

Do not place the juicer on

or near a hot gas or electric

burner, or where it could

touch a heated oven.

Always ensure the juicer is

properly assembled before

use. The appliance will not

operate unless properly

assembled. Refer to assembly.

Do not leave the juicer

unattended when in use.

Always ensure the juicer

is turned OFF by pressing

the OFF/ON switch on the

control panel to OFF. Then

switch the appliance OFF at

the power outlet and unplug

the cord. Make sure the

stainless steel filter basket

has stopped rotating and

the motor has completely

stopped before releasing

the safety locking arm and/

or attempting to move the

appliance, when the juicer

is not in use, and before

disassembling, cleaning

and storing.

Do not operate the Juice

Extractor continuously

with heavy loads for more

than 10 seconds. Allow the

motor to rest for 1 minute

between each use. Recipes

in this instruction book are

not considered a heavy load.

However, hard fruits and

vegetables will put excess

strain onto the motor if a low

speed is selected. Please refer

to the juicing guide on page

12 to determine the correct

speed for the fruits and

vegetables selected

for juicing.

Advertising