Sage Nutri Juicer Plus BJE520UK - Manual (Page 12)

11
PAge heAder..... aSSEmBlIng yoUr nEW aPPlIanCE
5. Raise the safety locking arm up and
locate it into the two grooves on
either side of the juicer cover. The
safety locking arm should now be in
a vertical position and locked into
place on top of the juicer cover.
6. Slide the food pusher down the
feed chute by aligning the groove
of the food pusher, with the small
protrusion on the inside top of the
feed chute. Continue to slide the
food pusher down into the
feed chute.
7. Place the pulp container into
position by tilting the base of the
pulp container away from the motor
base and slide the top of the pulp
container over the bottom of the
juice cover. Tilt the base of the pulp
container back into the motor base
ensuring it is supported by the
container support extending from
under the motor base.
notE
To minimise cleaning, line the pulp
container with a plastic freezer bag to
collect the pulp. Pulp can then be used
in other dishes, or as compost for the
garden or discarded.
8. Place the juice jug provided under
the spout on the right-hand side of
the juicer. The juice jug lid can be
used to avoid any splatter.
Alternatively you can fit the
custom-designed juice nozzle over
the juice spout and place a glass
underneath. The juice nozzle will
prevent splatter, ensuring mess
free juicing.