Sage Nutri Juicer Pro BJE820UK - Manual (Page 13)

12
PAge heAder..... aSSEmBlIng yoUr nEW aPPlIanCE
BEforE fIrSt USE
Before using your juice processor for the
first time, remove and safely discard any
packaging material and promotional labels.
Ensure the appliance is switched off
at the power outlet and the power cord
is unplugged.
Wash the filter surround, juice disc, puree
disc, puree insert, juicer cover, food pusher,
juice jug, juice jug lid and pulp container in
warm soapy water with a soft cloth or nylon
brush. Rinse and dry thoroughly.
for USE WItH JUICE ExtraCtor
1. Place the motor base on a flat dry
surface such as a bench top. Ensure
that the motor base is switched OFF
at the control panel, then switch the
appliance OFF at the power outlet
and unplug the cord.
2. Place the filter bowl surround on the
top of the motor base.
3. Align the arrows on the juice disc
with the arrows on the motor drive
coupling and push down until it
clicks into place. Ensure the juice
disc is fitted securely inside the
filter bowl surround and onto the
motor base.
4. Place the juicer cover over the filter
bowl surround, positioning the juicer
cover over the stainless steel filter
disc and lower into position.
5. Raise the safety locking arm up
and lock into the two grooves on
either side of the juicer cover. The
safety locking arm should now be in
a vertical position and locked into
place on top of the juicer cover.