Sage Nutri Juicer Pro BJE820UK - Manual (Page 26)

25
PAge heAder..... troUBlESHootIng
PoSSIBlE ProBlEm EaSy SolUtIon
Pulp too wet and
reduced extracted juice • Try a slower juicing action. Remove juice disc
(refer page 8) and thoroughly clean mesh walls with a fine
brush. Rinse juice disc under hot water. If the mesh holes
are blocked, soak the juice disc in a solution of hot water
with 10% lemon juice to unblock the holes or wash in the
dishwasher. This will remove excess fibre build up (from
fruit or vegetables) which could be inhibiting the juice flow.
Juice leaks between the
rim of the juicer cover
and the stainless steel
filter disc
• Try a slower juicing action by pushing the food pusher
down more slowly (refer page 9, step 6). Fruit and
vegetables with a high water content (tomatoes and
watermelon) should be juiced on low speed.