Sage Nutri Juicer Pro BJE820UK User Manual

Page 25

Advertising
background image

24

PAge heAder.....

troUBlESHootIng

PoSSIBlE ProBlEm

EaSy SolUtIon

machine will not work
when switched “on”

The safety locking arm may not be correctly engaged

in the vertical operating position with the locking arm

located into the two grooves on either side of the juice

cover (see picture on page 8, step 5).

Check the Overload Protection Button on the bottom of

the Motor Base to check if the safety device has not been

activated (see Note 3 on page 14 ‘Operating your new

appliance’).

The Overheating protection device has not been activated

automatically, allow more time for the motor to cool down

(see Note 1 on page 14 ‘Operating your new appliance’).

motor appears to stall

when juicing

Wet pulp can build up under the cover if the juicing action

is too vigorous. Try slower juicing action by pushing

the food pusher down more slowly. Clean the filter bowl

surround, the juice disc and the juicer cover. Select speed 5

instead of the speed 1 setting.

The Sage

by Heston Blumenthal

juice processor will

automatically stop operating if the motor is stalled. This is

a electronic safety feature. Either too much food is being

processed at one time or the pieces are not small enough.

Try trimming food, cutting food into smaller pieces of even

size and/or processing a smaller amount per batch. If this

occurs, the light surrounding the START/STOP button will

flash red.

To continue juicing, reset the Juicer by pressing the START/

STOP button to OFF, then clear the feed chute, finally turn

the appliance back on by pressing the START/STOP button

to ON.

Hard fruits and vegetables will put excess strain onto the

motor if a low speed is selected. Please refer to the juicing

guide on Page 10, to determine the correct speed for the

fruits and vegetables selected on juicing.

Excess pulp building

up the stainless steel
filter disc

Stop the juicing process. Remove the juicer cover the

stainless steel scrape off pulp. Re-assemble and begin

juicing again. Try alternating (soft and hard) vegetable and

fruit varieties.

Advertising