Sage Tea Maker BTM800UK - Manual (Page 14)

13
Before fIrST USe
WARNING
Filling past the 'MAX' line may result
in serious burns or injuries as a result
of overflowing hot or boiling water.
Filling below the 'MIN' line will result
in the Tea Maker™ switching off before
the water has boiled or reached the
selected temperature.
5. Unwind the power cord completely
and insert the power plug into a
grounded wall outlet.
6. The LCD screen will illuminate with
the default brew temperature and
brew time display.
7. Press the left ARROW UP
button until the LCD screen
displays 100°C. The 'Custom' LED
will automatically illuminate.
PrePArInG THe TeA MAKer™ for
USe
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any
packing material, promotional labels
and tape from the Tea Maker™.
2. Remove the jug lid then remove the
tea basket from the magnetic post
within the glass jug. Wash the jug lid,
tea basket, basket lid and tea scoop
in warm soapy water with a soft
sponge, rinse and dry thoroughly.
WARNING
Never immerse the base of the glass
jug, the power base, power cord or
power plug in water or allow moisture
to come in contact with these parts
3. Place the power base on a flat,
dry surface.
4. Without the tea basket in place, fill
the glass jug to the water maximum
mark (1500mLWATER MAX) and
place on the power base. Securely fit
the jug lid onto the glass jug.
WARNING
Never fill the glass jug with chilled
water. Allow the Tea Maker™ to cool
before refilling.