Sage Tea Maker BTM800UK - Manual (Page 23)

22
PAge heAder..... reSeTTInG defAULT SeTTInGS/STAndBy Mode
noTe
Pressing and holding the
ARROW UP button or
ARROW DOWN button will
increase the scrolling speed.
4. To set the START TIME, press the
right ARROW UP button to
increase the time, or the right
ARROW DOWN button to decrease
the time in 1 minute increments.
Ensure the correct ‘AM’ or ‘PM’
is displayed.
5. Once current time and start time
are programmed, press either the
flashing HOT WATER|Cancel or
TEA|Cancel button to select which
feature you would like to start at the
programmed time.
6. The LCD screen will display the
current time and start time, in
addition to the
AUTO START symbol. The
AUTO START button surround will
illuminate and remain illuminated
until the START TIME is reached,
indicating that the ‘Auto Start’
feature has been activated.
7. Ensure that the Tea Maker™ is
prepared with:
a) Sufficient water in the glass jug
and tea leaves in the basket for the
tea brewing cycle or,
b) Sufficient water in the glass jug
for the water heating cycle.
noTe
Insufficient water may discolour your
Tea Maker™ base!
8. Once the selected START TIME
is reached, the Tea Maker™ will
automatically commence the tea
brewing or water heating cycle.
During this time, the AUTO
START button surround will no
longer illuminate until the cycle is
complete.
re-selecting the ‘Auto Start’ feature using
previous STArT TIMe
1. Press the AUTO START button
once. The HOT WATER|Cancel and
TEA|Cancel buttons will flash.
2. Press either the HOT
WATER|Cancel or TEA|Cancel
button to re-select the desired
function. The ‘Auto Start’ feature has
now been re-set.
noTe
The ‘Auto Start’ feature can be
canceled anytime by pressing the
AUTO START button. The LCD
screen will no longer display the
AUTO START symbol and the
AUTO START button surround
will cease to illuminate.
reSeTTInG defAULT SeTTInGS
Even when unplugged from the power
outlet, the Tea Maker™ will remember the
last setting used for each setting. To restore
the Tea Maker™’s default settings for each
function, simultaneously press and hold
AUTO START and KEEP WARM buttons
for 2 seconds.