Sage Tea Maker BTM800UK - Manual (Page 16)

15
BreWInG TeA
4. Replace the basket lid on top of
the basket. Ensure lid is securely
snapped in place by pressing firmly
on the centre of the lid.
5. Slide the assembled basket on to
the magnetic post located within
the glass jug. The assembled basket
will attach itself to the top of the
magnetic post. Replace jug lid.
SeLeCTInG THe TeA TyPe
The tea type determines brew temperature.
The Tea Maker™ has 5 preset tea types
recommended for optimal brewing of
Green, Black, White, Herbal or Oolong tea.
It also features a customisable tea type
temperature setting for other tea varieties
or to suit your personal taste (see page 20,
Customising Brew Temperature).
1. To select a preset tea type:
a) Press the TEA TYPE button and
toggle through until the desired tea
– 'Green', 'Black', 'White', 'Herbal' or
'Oolong' illuminates.
b) The LCD screen will display
the preset brew temperature
recommended for optimal brewing
of the selected tea type. This is
displayed on the left hand side of
the LCD screen.
USe AS A TeA MAKer ™ for
BreWInG TeA
1. Remove the glass jug from the power
base and remove jug lid. When
brewing tea, fill with desired amount
of water. Ensure you do not fill past
the tea maximum mark (1200mL
TEA MAX).
WARNING
Filling past the ‘MAX’ line may result
in serious burns or injuries as a result
of overflowing hot or boiling water.
Filling below the ‘MIN’ line will result
in the Tea Maker™ switching off before
the water has boiled or reached the
selected temperature.
2. Place the basket on a flat, dry surface.
Remove basket lid by lifting from
the sides.
3. Use the provided tea scoop to fill the
basket with tea leaves. As a general
guide, use 1 scoop of tea leaves per
cup / 250ml of water, however this
will depend on the instructions on
tea packaging and your personal
preference (See page 12, Water to
Tea Scoop Ratio).