Sage Tea Maker BTM800UK - Manual (Page 22)

21
PAge heAder..... AUTo STArT
Manual mode-brew times over 10 minutes
In this mode, once the correct water
temperature is reached, the assembled
basket will automatically lower and
commence brewing. However, it will not
automatically lift the basket, allowing you to
manually lift it once the desired brew time
has elapsed.
i) Press the right ARROW UP
button to increase the time up to the
maximum 10 minutes.
ii) Continue to press the right
ARROW UP button. The LCD
screen will display ‘MANUAL LIFT’
and ‘- - : - -‘ on the right side of
the LCD.
iii) Once the Tea Maker™ is activated
and the correct water temperature
is reached, the basket will
automatically lower.
iv) In the manual lift mode, the LCD
screen will automatically commence
the ‘Brew Time’ feature. This feature
counts up to a maximum of
60 minutes, allowing you to
monitor how long the basket has
been submerged.
v) Once the desired brew time has
elapsed, press and hold the BASKET
button for 2 seconds. The basket
will rise.
vi) Once the brewing is complete,
the LCD screen will automatically
display the ‘Time Since Brew’
function. This function counts up to
a maximum of 60 minutes, allowing
you to monitor the freshness of
your brew. It does not activate the
heating elements.
noTe
Once a customised time has been
selected and one tea making or water
heating cycle has been activated,
the customised time will remain in
the memory of the Tea Maker™ until
you change it. To return to default
settings, see page 22.
AUTo STArT feATUre
This feature allows you to program the
specific time when the Tea Maker™ will
automatically turn on and start either a tea
brewing cycle or water heating cycle.
Setting the ‘Auto Start’ feature
1. Press and hold the AUTO START
button for 2 seconds. The button
surround will illuminate and the tea
alert will sound.
2. The LCD screen will display the
AUTO START clock symbol and a
blinking CURRENT TIME and
START TIME.
3. To set the CURRENT TIME, press
the left ARROW UP button to
increase the time, or the left
ARROW DOWN button to decrease
the time in 1 minute increments.
Ensure the correct ‘AM’ or ‘PM’
is displayed.