Seca 645 band_1 - Manual (Page 92)

92 •
6. Read off the measurement result.
The additional weight is automatically deducted.
7. To deactivate the TARE function, press the
(hold/tare) arrow key until the message "NET" is
no longer displayed or turn off the scale.
NOTE
The maximum weight which can be displayed is
reduced by the weight of the objects already
placed on the scale.
Keeping the
measurement result in
the display (HOLD)
When you activate the HOLD function, the weight value
continues to be displayed after the weight has been
removed from the scale. As a result, you can attend to
the patient before recording the weight.
1. Ensure that the scale has no load.
2. Switch on the scale.
3. Weigh the patient as described in the section
entitled "Weighing a patient".
4. Press the (hold/tare) arrow key briefly.
The display flashes until a stable weight is meas-
ured. The weight is then continuously displayed.
The
symbol (non-calibratable function) and the
message "HOLD" are displayed.
5. To deactivate the HOLD function, briefly press the
(hold/tare) arrow key.
The
symbol and the "HOLD" message are no
longer displayed.
NOTE
If the auto hold function is activated, the weight
value is automatically displayed permanently
until the scale switches itself off or is switched
off, see "Activating the auto hold (Ahold) func-
tion" on page 98.
tare
tare
tare