Seca 645 band_1 - Manual (Page 95)

Operation • 95
English
4. Press and hold the Enter key (send/print) of the
scale.
The measured value is sent to the wireless printer.
BMI is calculated.
Height, weight and BMI are printed out.
Automatic switching of
weighing range
The scale has two weighing ranges. In weighing range
1 (
), capacity is reduced, but the increments in the
weight display are finer. In weighing range 2 ( ), you
can use the maximum capacity of the scale.
After the scale is switched on, weighing range 1 is
active. If a particular weight is exceeded, the scale
automatically switches to weighing range 2.
To switch back to weighing range 1, proceed as
follows.
 Completely remove the load from the scale.
Weighing range 1 is active again.
Switching off the scale
 Press the Start key.
NOTE
When in battery mode, the scale will switch off
automatically after a short period if no load is
placed on it.