Smart Power Systems HR-110 - Manual (Page 20)

Smart Power
®
Systems
A. C. MODULAR GENERATOR SYSTEM
Page 19 of 53
HR-6.2, HR-8, HR-10 and HR-110 tray assemblies disassembled into base tray
assembly (with diamond plate cover added), cooler/fan enclosure and reservoir
Figure 9
6.
Mount Command & Control Center:
a. Create hole pattern as shown in Figure 10.
b. Mount Command & Control Center to vehicle using #10 stainless steel
fasteners.
c. Connect Command & Control Center to system controller unit using p/n
3722004 harness.