Torbal AG Series - Manual (Page 2)

- 2 -
1. Keyboard and Scanner Setup
To connect a barcode scanner and a keyboard simultaneously, please follow the steps below:
Before starting, have the following items ready:
• A scale
• A/C adapter
• Barcode scanner
• Scanner Y-cable (long, 3 ends)
• Keyboard
• Keyboard adapter cable (short, 2 ends)
1.
Clear the pan, turn off the scale and unplug the power cable.
2.
Connect the keyboard’s PS/2 connection to the keyboard adapter cable.
3.
Connect the keyboard and adapter set to the scanner cable.
4.
Connect the RJ-45 scanner cable end to the barcode scanner.
5.
Take the PS/2 end of the scanner cable and plug it into the scale.
6.
Plug in the power cable to the scale and it should automatically turn on.
7.
Once the scale is on, the barcode scanner and the keyboards green LEDs should light up to indicate
proper connections were made. If the LEDs do not light up, try reconnecting the cables.