Torbal AG Series - Manual (Page 5)

- 5 -
3. Using the scanner with the CHECK COUNTING feature:
1.
To use the scanner with the check counting feature you must first enable check counting mode and
make sure that limit set labeling is turned on.
2.
Start check counting and press the FUNCTION key to enter into the database.
3.
Select an empty slot and pres the RIGHT ARROW key.
4.
Highlight name and press ENTER.
5.
Instead of typing in the name, scan the barcode associated with that sample.
6.
Configure your limit set, highlight EXIT/SAVE and press ENTER.
7.
Place a container on the pan and press the TARE key.