Torbal AG Series - Manual (Page 7)

- 7 -
4. Using the scanner with the PERCENT WEIGHING function:
1.
To use the scanner with the percent weighing function you must first enable percent weighing mode
and make sure that reference labeling is turned on.
2.
Start percent weighing and press the FUNCTION key to enter into the database.
3.
Select an empty slot and pres the RIGHT ARROW key.
4.
Place a container on the pan and press the TARE key.
5.
Place a sample in the container and press ENTER to accept the sample and continue.
6.
Instead of typing in the name, scan the barcode associated with that sample. This will briefly display
the barcode and save it into the database.