Torbal AG Series - Manual (Page 9)

- 9 -
5. Using the scanner with the CHECK WEIGHING function:
1.
To use the scanner with the check weighing function you must first enable check weighing mode and
make sure that limit set labeling is turned on.
2.
Start check weighing and press the FUNCTION key to enter into the database.
3.
Select an empty slot and pres the RIGHT ARROW key
4.
Highlight name and press ENTER.
5.
Instead of typing in the name, scan the barcode associated with that sample.
6.
Configure your limit set, highlight EXIT/SAVE and press ENTER.
7.
Place a container on the pan and press the TARE key.
8.
At this point you can continue using the check weighing function.