Torbal IP68 Rated - Manual (Page 10)

- 10 -
1. Carefully remove the scale, pan, and all of its components out of the packaging and place them on a
stable surface where the scale will not be affected by any mechanical vibrations or high air
movements.
2. After removing all components from the packaging refer to the assembly instructions which have been
provided with the scale, and carefully assemble the unit.
3. After assembling the scale lift the platform pan and then remove straps which are used to secure the
frame during shipping.
Important: When transporting the scale these straps must be replaced prior to shipping.
4. Use the rotational feet to level the scale. An air bubble level is built into the platform for this purpose.
Adjust the feet until the bubble is center in the level indicator.
Correct Incorrect
Chapter 5: Unpacking the Balance and Getting Started