Torbal IP68 Rated - Manual (Page 40)

- 40 -
16.1. Enabling and Disabling Receipt Fields
1. Press the MENU key, when the option “Print” is displayed press the T key, and then select a desired field
by press the T key once again when the name is displayed.
2. The scale will display options “ON” and” Off”. To enable the field press the T key when “On” displayed,
to disable the field press the T key when “Off” is displayed.
16.2. Assigning Operator and Product ID numbers.
1. From the weighing mode press and hold the MENU key for 3 seconds or until the scales displays
“IDPROD” and “IOPER”. Select the desired option by pressing the T key.
2. A dashed line will be displayed indicating to manually enter ID number. To manually enter the ID
number, use the following keys: the -->0<-- key to increment a digit, the T key to accept and go to the
next digit, the
key to insert a decimal, and the MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
value
PrINT HEADER
ON OFF
0.00 IDPRoD