Torbal IP68 Rated - Manual (Page 50)

- 50 -
7. Once the time has been set the scale will display the current year. To change the years press the T key.
22.3. Enabling PIN access to the Date Configuration Function.
Configuration of the current date and time can be protected with a PIN. Once set the user is prompted to enter
a pin number before time and date change is allowed.
1. To Set PIN for date configuration press the MENU key. When the option “Date” is displayed press the T
key, and then select the option “Dat PIN ” by press the T key once again.
2. The scale will display a dashed line indicating to enter a desired PIN. To enter the PIN, use the following
keys: the -->0<-- key to increment a digit, the T key to accept and go to the next digit, the key to
insert a decimal, and the MENU key to accept the entire setting.
To increment a digit To accept and go to
next digit
To insert a decimal To accept entered
PIN
3. After setting the PIN, you will be asked to key in the pin in order to access the “Date and Time” feature.
To remove or disable PIN access, enter the “Date” function and key-in the current PIN. After accessing
the “Date” menu, select option “DatPin” and do not enter a new PIN number. Simply press the MENU
key with the dashed line displayed.
y - 2010
Date DATPIN
_