Torbal IP68 Rated - Manual (Page 29)

- 29 -
5. The display will read 0 indicating that you may place the first ingredient into the container. Once the
Weight of the ingredient stabilized press the T key to accept the ingredient weight.
6. Once the weight has been accepted place the second ingredient into the container. Once the weight of the
second ingredient stabilizes press the T key to accept the ingredient weight.
7. Steps 1 and 2 can be repeated until all ingredients are in the container. Before obtaining a Total make sure
that the last ingredient weight was accepted and the display reads 0.
8. To obtain the Total for the recipe press the TOGGLE key and the total weight for all of the ingredients
will be displayed along with 2 horizontal bars on the left of the display which indicate that the total is
being displayed.
Change these to picture below (that was item 9) revised for function light, net light, and left hand bars
(2)
0.22
0.37
reCIpe
0.44
reCoff