Torbal IP68 Rated - Manual (Page 17)

- 17 -
8.3. Extending the resolution
1. The resolution of the scale can be temporarily increased by pressing the HR key. This temporary
increase in resolution can be very useful in scales where d=e. The display resolution is increased for 5
seconds and then reverts automatically.
Note: These results are not legal for trade and cannot be sent to a printer or an external computer.
8.4. Zeroing the scale
If the display signals are out of zero condition “--", the scale must be zeroed before weighing.
1. To zero the scales press the Ж0Е key.
22.036
- -
-------
0.00