Welch Allyn Connex CS Central Station & Server - User Manual - Manual (Page 107)

15
101
Customizing Reports
Configure a custom facility logo
It may be desired to place the facility logo on some printouts from Connex CS. Custom
logos are available for use on printouts from the Patient Review and Station Review
functions.
The facility logo can be changed by replacing a file in 2 locations within the file system.
To insert a custom facility logo:
1. Obtain the logo file from the customer and copy the facility logo file onto the central
station desktop.
2. Each central station must be updated separately to support using a custom facility
logo.
3. In Windows shell, open a Windows Explorer window.
4. Navigate to the following location:


C:\Program Files (x86)\Welch Allyn \ Connex\ CS\<CS
Version>\Components\PatientReview\Images
5. Rename the file FacilityLogo.png to WA-logo.png to make a backup copy.
6. Copy the custom facility logo into the Images directory, and rename the file as
FacilityLogo.
7. Navigate to the following location:


C:\Program Files (x86)\Welch Allyn \ Connex\ CS\<CS
Version>\Components\StationReview\Images
8. Rename the file FacilityLogo.png to WA-logo.png to make a backup copy.
9. Copy the custom facility logo into the Images directory, and rename the file as
FacilityLogo.
10. Reboot the central station for changes to take affect.
11. After the Connex CS application restarts, open the Review function for a patient and
perform a print function from one of the tabs.
Note Connex CS supports logos up to the design layout size of 3.76”w x 0.72”h (271 x
52 pixels @ 72 dpi).