Configure auto discharge settings – Welch Allyn Connex CS Central Station & Server - User Manual User Manual
Page 88
82
Localize Station settings
Welch Allyn
Configure auto discharge settings
The Welch Allyn ADT Task Scheduler Service provides a configurable service that runs
automatically in the background to assist in managing the Patient List contents and
remove old entries.
1.
From a Central Station, navigate to Settings > Advanced settings (if required) >
Admin tools > Settings menu, click on Sever.
2.
From Connex Server, launch the Admin Tools launcher > Admin tools tab >
Settings menu, click on Sever.
3.
The server available settings window appears. An example is shown in
Automatic discharge settings controls available in Server settings window”
below.
4.
Select Edit to make changes.
Figure 12-11: Automatic discharge settings controls available in Server settings window
Note
The automatic discharge feature is only applied to patients that are not currently
being monitored on Connex CS