Welch Allyn CP 150 spirometry option - User Manual - Manual (Page 48)

Item Specification
Reports
FVC testing Volume/time curve
Flow/volume curve
Both volume/time and displayed curves
No curves
None
Parameters
FVC testing FVC, FIVC, FIV1, FIV1%, FEV0.5, FEV1, FEV2, FEV3, FEV5, FEV6, FEV1/FEV6, FEV0.5%,
FEV1%, FEV2%, FEV3%, FEV5%, FEV6%, PEF, FEF25, FEF50, FEF75, FEF0.2-1.2,
FEF25-75, FEF75-85, PIF, FIF50, FEF50/FIF50, FET
Quality checks Effort acceptability and test reproducibility checks.
Effort-quality messages and test-quality grades.
Visual incentive for assistance in coaching patients.
Connectivity Compatible with CardioPerfect workstation.
Electrocardio protection against
ingress of water, per IEC 60529
IPXO
Spirometer protection against
ingress of water, per IEC 60529
IP20
Protocols PCP (primary care practitioner), NIOSH, None
Environmental operating
conditions
Temperature +10° C to +40° C (+50° F to +104° F)
Relative humidity 15 - 95% noncondensing (30 - 70% for printing)
Atmospheric air-pressure limits 700 - 1060 hPa
Environmental storage
conditions
Temperature -20° C to +50° C (-4° F to +122° F)
Relative humidity 15 - 95% noncondensing
Atmospheric air-pressure limits 700 - 1060 hPa
Specifications are subject to change without notice.
44 Specifications CP 150 spirometry option