Welch Allyn Propaq 6.2X-8.4X/Propaq Encore 1.20-1.3X - Quick Reference Guide - Manual (Page 10)

8 Protocol Systems, Inc.
Revert to Factory Power-On Default Settings
To reprogram the monitor to the original factory power-on
default settings (as listed in Appendix B of the
Propaq Reference
Guide and Propaq Encore Reference Guide ):
1.
From the Main Menu, press:
• Propaq Encore:
SETUP, MORE, MORE, PROGRAM, DEFAULT, YES.
• Propaq 100 Series:
SYSTEM, (MORE), PROGRAM, DEFAULT.
note...
This step changes all of the power-on default settings to the factory default
settings
except for Date, Decimal, and ECG Filter (and LCD Contrast). These
settings remain at the current setting.