Compaq Deskpro 2000 Series - Manual (Page 116)

6-16 Upgrading the Minitower Computer
Writer: Holly Jahangiri Saved by: ACastle Saved date: 07/25/97 2:13 PM
Pages: 28 Words: 3072 Template: c:\msoffice\templates\comm.dot
File Name Ch6.doc Part Number 278019-001
CAUTION: If your minitower system has been upgraded with a DIMM
memory module taller than 1.25 inches in the outermost memory
socket (J12 on Pentium systems, as shown below or J2/Slot 1 on
Pentium II systems):
Remove the DIMM from socket J12 (J2/Slot 1 on Pentium II systems)
prior to removing the system board to avoid damaging the DIMM or the
DIMM socket. It is not necessary to remove the system board in order
to remove or install DIMM memory modules.
Remove DIMM Memory Module from Outermost Socket
Before Removing the System Board