Compaq Deskpro 2000 Series - Manual (Page 9)

Reference Guide 1-3
Writer: Holly Jahangiri Saved By: Alyce Castle Saved Date: 06/26/97 12:09 PM
Pages: 18 Words: 2860 Template: c:\msoffice\templates\comm.dot
File Name Ch1.doc Part Number 278019-002
■ Five drive bays on desktop models:
❏ One external 3.5-inch, one-third height diskette drive
bay
❏ One internal 3.5-inch, one-third height drive bay
❏ Two external 5.25-inch half-height bays for optional
CD-ROM drive, LS-120 drive, PD-CD drive, diskette
drive, tape drive, or hard drive
❏ One internal 5.25-inch third-height bay for optional
hard drive
■ Five drive bays on minitower models:
❏ One external 3.5-inch, one-third height diskette drive
bay
❏ One internal 3.5-inch, one-third height drive bay
❏ Three external 5.25-inch half-height bays for optional
CD-ROM drive, LS-120 drive, PD-CD drive, diskette
drive, tape drive, or hard drive
■ Pentium systems: One 2.1- or 3.2-gigabyte (GB) Enhanced
IDE (EIDE) SMART II hard drive
Pentium II systems: One 2.1- or 3.2-gigabyte (GB) Ultra
ATA SMART II hard drive
All drives feature drive fault prediction.
■ One 1.44-MB, 3.5-inch high-density diskette drive installed
■ Pentium systems: One 16X slot-load IDE CD-ROM drive,
16-bit audio card, and enhanced speaker, installed on select
models
Pentium II systems: One 24X slot-load IDE CD-ROM drive,
16-bit audio card, and enhanced speaker, installed on select
models
■ Pentium systems: S3 Trio64V2/GX enhanced 64-bit
graphics controller installed with 1-MB SGRAM,
expandable to 2 MB
Pentium II systems: Matrox MGA-1064 SG Graphics
Accelerator installed with 2-MB SGRAM, expandable to 4 MB