Canon MF6500 - Manual (Page 54)

1
2
3
4
TOP
Back Previous Next
2-40
Introduction
Scanning a
Document
Troubleshooting
Appendix
Table of Contents
Index
● [Color Settings] Tab
[Color Correction] Selects the type of color correction.
[Recommended]:
Vividly reproduces the tone of a document
on the screen.
[Color Matching]:
Select to automatically match the scanner,
monitor and color printer colors. If selected,
the Color Settings buttons are invalid in the
[Advanced Mode] tab sheet. This setting is
available when [Color] or [Color
(Documents)] is selected in [Color Mode].
[None]:
No color matching is made. This setting is
available when [Color], [Color (Documents)]
or [Grayscale] is selected in [Color Mode].
[Always Execute
the Auto Tone] If selected, the image color will always be
automatically corrected. This setting is
available when [Color], [Color (Documents)]
or [Grayscale] is selected in [Color Mode].
[Monitor Gamma] Enables you to perform gamma correction.
Specify the gamma value (0.10 to 10.00) of
the monitor for viewing the scanned image.
This setting is not reflected in the scanning
result when [Black and White] is selected in
[Color Mode].
NOTE
[Monitor Gamma] value will be fixed to 2.20 when [Color
Matching] is selected in [Color Correction].