Canon FAX-TT250 User Manual
Page 22
22
Registering one-touch speed dialling
numbers and names
One-touch speed dialling allows you to dial a number by pressing a single button. Before you can use one-touch
speed dialling, you must register the receiving number with your fax.
You can also register the name of the party; the name appears on the printout of the one-touch speed dialling list.
*
To delete the name and number registered under the one-touch speed dialling button, press [Clear] and [Start/Copy] after you
perform steps 1 to 3 above.
1
Press [Function].
2
Use [
] or [
] to select <TEL REGISTRATION>, then press [Start/Copy]
twice.
3
Use [
] or [
] to select the number of the one-touch speed dialling button (01-05) under which you want to
register the number.
If a number is already registered under this one-touch speed dialling button, the number is displayed on the LCD.*
4
Enter the party’s number (up to 50 digits) using the numeric buttons, then press [Start/Copy] to register the
number.
5
Enter the party’s name (up to 16 letters) using the numeric buttons (see pp. 17, 18), then press [Start/Copy] to
register the name.
6
To assign additional one-touch speed dialling numbers, start from step 3.
To finish, press [Stop].
For user convenience, the destination label provided with your fax should be fitted over the one-touch speed dialling buttons on
the left of the operation panel.
01=
Thalia.book Page 22 Tuesday, September 28, 2004 10:13 AM