Canon FAX-TT250 - Manual (Page 34)

34
Sequential broadcasting
Sending a document to more than one location
Sequential broadcasting sends one document to more than one location.
You can send to a total of 35 locations as follows:
• One-touch speed dialling = 5 locations
• Coded speed dialling = 30 locations
You can enter the one-touch speed dialling and coded speed dialling locations in any order. You simply press the one-
touch speed dialling button, or press [Coded Dial] followed by the two-digit code.
You must press each button within 10 seconds of the preceding one. The fax begins the operation approximately 10 seconds
after you press the last button.
1 Load the document face down into the document feeder (see p. 13).
2 Dial the receiving party’s fax numbers as you need, then press [Start/Copy].
• The fax reads the document into memory and begins sending.
• To cancel a transmission, press [Stop] during dialling or transmission. All transmissions in the sequence are cancelled.
Thalia.book Page 34 Tuesday, September 28, 2004 10:13 AM