Registering coded speed dialling numbersand names, Registering coded speed dialling numbers and names – Canon FAX-TT250 User Manual
Page 23
23
2
PREP
ARING
TO USE YOUR
F
A
X
Registering coded speed dialling numbers
and names
Use coded speed dialling to dial a fax number at the press of three buttons. A fax/telephone number can be registered
under each two-digit speed dialling code. You can also register the name of the party; the name appears on the
printout of the coded speed dialling list.
*
To delete the name and number registered under the coded speed dialling code, press [Clear] and [Start/Copy] after you perform
steps 1 to 4 above.
1
Press [Function].
2
Use [
] or [
] to select <TEL REGISTRATION>, then press [Start/Copy].
3
Use [
] or [
] to select <CODED SPEED DIAL>, then press [Start/Copy].
4
Use [
] or [
] to select the two-digit code (01-30) under which you want to register the number.
If a number is already registered under this coded speed dialling code, the number is displayed on the LCD.*
5
Enter the party’s number and name the same way you registered them for one-touch speed dialling.
See steps 4 to 5, Registering one-touch speed dialling numbers and names, p. 22.
6
To assign additional coded speed dialling numbers, start from step 4.
To finish, press [Stop].
01=
Thalia.book Page 23 Tuesday, September 28, 2004 10:13 AM