Canon FAX-TT250 - Manual (Page 9)

9
1
SE
TTIN
G
UP
Installing the ink film
You must install the ink film before receiving or copying documents.
For information on replacing a used ink film cartridge, see Replacing the ink film on p. 48.
1 Lift the operation panel gently with pushing up the
open lever until it locks into position.
Make sure the handset is on its cradle.
2 Remove the elastic bands from the ink film cartridge
and attach it to the ink film holders (2 holders).
We recommend you do this on a flat stable surface such as a
table.
3 Rotate the blue gear on the holder and front roller of
right side to arrow direction to take up any slack in the
ink film.
If a label is visible on the ink film, turn the blue gear on the
holder until the label is no longer visible.
Open lever
Tab
Rear Roller
Front Roller
Slots
Notch
Gear
• Align the notches on the front
roller with the slots on the
center core of the ink film.
• Align the notches on the rear
roller with the slots on the
center core of the ink film.
Thalia.book Page 9 Tuesday, September 28, 2004 10:13 AM