Concord Camera Eye-Q Go LCD Camera - Manual (Page 17)

16
2. Camera Mode
The default mode for taking images is the fine quality
setting. Please refer to the Image Quality section to
learn how to change the settings of your camera.
(fig.2.1)
Taking Still Images:
1. Set the Mode switch to .
2. Position the subject in the LCD or the viewfinder.
3. Gently press the Shutter button (fig.2.2) and keep
the camera still when the camera ready LED next
to the viewfinder is lit. This indicates that the
image is being captured. (fig.2.3)
4. When the image has been captured, the camera
ready LED next to the viewfinder will blink. This
indicates that the image is being stored in the
memory. You may move the camera at this time.
5. A preview of the image will be displayed on the
LCD for 1 second and the file counter number
displayed in the LCD will be updated.
MAIN MENU
1. In Mode, press MENU.
2. Press or to toggle between the
options.
3. Press to view the sub-menu of the
selected option.
4. If you would like to exit any menu, press
until Main Menu is highlighted and
press OK to return to the Main Menu.
OR
5. Press MENU to exit.
fig.2.2
fig.2.3
fig.2.1
M o d e
Q u a l i t y
F l a s h
W B
M A I N M E N U
GO LCD Manual-E (511185-00) 5/7/02 6:01 pm Page 16