Concord Camera Eye-Q Go LCD Camera - Manual (Page 46)

45
Tips and Troubleshooting
SYMPTOM
Flash image taken
is too light.
Flash image taken
is too dark.
Flash did not work
Image taken has
poor quality.
POSSIBLE
CAUSE
Subject is too close.
Subject is too far away.
Flash is not on.
There was sufficient
light for the shot and
the flash was not
needed.
Camera’s flash has been
turned off.
Flash did not charge.
Battery is empty.
Subject or camera
moved as image was
taken.
POSSIBLE
SOLUTION
Move the camera further
from the subject.
Move camera closer to
the subject.
Turn flash on.
This is normal as your
Cameras electronic light
sensor is programmed to
only fire the flash when
needed.
Turn on Automatic Flash.
Verify that the LED has
stopped blinking before
taking the image.
Replace the battery.
Hold camera steady until
image is taken.
TAKING IMAGES
GO LCD Manual-E (511185-00) 5/7/02 6:02 pm Page 45