Concord Camera Eye-Q Go LCD Camera - Manual (Page 22)

21
FLASH
This feature enables the camera to override the flash mode that is set by
the Slide Switch.
In the flash mode, there are 3 flash options: Auto ( A ), Flash ( ) or
Flash Off ( ).
Flash Option Distance from Lighting Condition
subject
Auto ( A ) 8.5ft (2.5m) and Use this option in variable lighting
3.9ft (1.2m).
conditions. The camera will automatically
detect when the flash is needed.
Flash ( ) 8.5ft (2.5m) and Use this option in backlight or low light
3.9ft (1.2m). conditions. The flash will work in bright
and dark conditions.
Flash Off ( ) 3.9ft (1.2m) to Use this option in outdoor or bright
infinity light conditions.
1. In the FLASH menu, press or to choose between Auto ( A ),
Flash ( ), and Flash Off ( ).
2. Press OK to select the flash mode and press MENU to exit.
3. Position the subject in the camera.
4. Take the image.
5. The flash mode will return to the default setting on the Slide Switch.
Note: The selected option will be marked by ( • ).
Note: The flash may need time to recharge between photos. While it is
charging the Camera Ready LED blinks. When it stops blinking the
camera is ready to take another image. If the batteries are low, the
flash will not work. Please insert fresh batteries.
GO LCD Manual-E (511185-00) 5/7/02 6:02 pm Page 21