Concord Camera Eye-Q Go LCD Camera - Manual (Page 21)

20
SLIDE SWITCH
The camera has a Slide Switch that has 3 image taking modes:
macro ( ), portrait ( ) and distant ( ). The current flash setting is
displayed in the upper left corner of the LCD.
Slide Switch Flash Status Conditions Distance from
Position subject
Macro ( ) Auto Flash ( A ) Use this option to 0.65m to 1.4m
take close
photography.
Portrait ( ) Auto Flash ( ) Use this option in 1.4m to 3.2m
variable lighting
conditions. The
camera will
automatically detect
when the flash is
needed.
Distant ( ) No Flash ( ) Use this option in 1.4m to infinity
outdoor or bright
light conditions.
Using the slide switch:
1. Position the Slide switch towards the macro ( ),
portrait ( ) or distant ( ) icon until the switch
clicks into place. (fig.2.8)
2. To ensure accurate focus, refer to the chart above to
make sure that the subject is within the distance
range in the mode that you selected.
Note: The default flash mode is set by the Slide Switch. To manually
override the slide switch flash mode, the setting must be changed on the
Flash menu on the LCD. Please refer to p. 21 for further information.
A
fig.2.8
GO LCD Manual-E (511185-00) 5/7/02 6:02 pm Page 20