Concord Camera Eye-Q Go LCD Camera - Manual (Page 42)

41
TV Mode
The Concord Eye-Q Go LCD camera allows you to view stored files and to
record clips on your television. To begin, check your television
documentation to determine what video standard you should set your
camera to, either NTSC or PAL.
Changing the TV Mode setting:
1. In the Setup menu press until TV is highlighted
2. Press to change the setting to NTSC or PAL.
Connecting to the television:
1. Connect the AV cable supplied with your camera
into the jack marked VIDEO or VIDEO IN on your
television.
2. Turn on your television.
3. Set the television to video mode according to
the instructions in the owner’s manual. (This is
usually channel 3, 4 or AV)
4. Turn the camera on by pressing the Power
button.
5. Connect the other end of the cable into the VIDEO
port located underneath the cable connection panel. (fig.5.1)
fig.5.1
B r i g h t n e s s
S e t u p
E x i t
M A I N M E N U
T i m e - o u t 3 0 S
D r i v e r H D D
T V N T S C
L a n g u a g e
S E T U P
+
GO LCD Manual-E (511185-00) 5/7/02 6:02 pm Page 41