Vertical Communications DXP Series - Manual (Page 39)

Sending And Receiving
Non-Verbal Messages
5.1 Using the Messaging Feature
•
To turn on the message-waiting light and broken dial tone at an
idle telephone,
1. Press INTERCOM.
2. Dial ✳ 3.
3. Dial extension number of the station you want to alert. The
message-waiting light of that station will flash.
•
You can also turn on the message-waiting light and broken dial
tone at another station when that station is busy,
1. Hear the busy tone and remain on the line.
2. Press MSG.
3. Hang up.
•
To turn off the message waiting light at a busy or idle station,
1. Press INTERCOM.
2. Dial # 3.
3. Dial extension number of alerted station. The message-waiting
light of that station will turn off.
5
GCA70–258 Sending And Receiving Non-Verbal Messages
LCD Speakerphone Station User's Guide 5 – 1